STATEMENT OF YEAR 2000 COMPLIANCE 

First Issued June 1, 1999

This page explains "Year 2000" compliance issues for users of Digitek's products and services."   If you have any questions about Y2K and any of the products that we support, contact us at

To be "Year 2000 Compliant" a system must:

1. Handle date information before, during and after midnight, December 31, 1999, including but not limited to accepting date input; providing date output; and, performing calculations, and comparisons on dates or portions of dates. Date interpretation and manipulation must be correct for all valid date values within the application domain.

2. Function accurately and without interruption before, during and after January 1, 2000, without any change in operations associated with the advent of the new century. 

3. Respond to two-digit year date input in a way that resolves the ambiguity as to the century in a disclosed, defined, and predetermined manner. Interfacing software must make the same century assumptions when processing two-digit years. 

4. Process 2000 as a leap year. 

5. Correctly handle date fields containing non-date information and correctly handle a date held in a non-date field. 

6. Correctly process any date with a year specified as "99" and "00", regardless of other subjective meanings attached to these values. 

CORPORATE READINESS

Digitek has performed an internal audit of all critical systems, software and suppliers, and has taken appropriate action to ensure "Year 2000" readiness.

PRODUCT COMPLIANCE

All Digitek's software and hardware currently being sold has been fully tested by their respective developers for compliance with "Year 2000" date format and calculation requirements.

The following list describes the state of "Year 2000" compliance for all the various software packages sold by Digitek over the years.  Included are any relevant compliance issues or action required.

CNC Innovations/CNC Engineering 

All of their current software is designed to perform date calculations using a four-digit year value, and is "Year 2000 Compliant" when running on a "Year 2000 Compliant" computer platform. 

Action required for all software packages: 

Verify that the computer's hardware, BIOS and operating system software are "Year 2000 Compliant".

Compliant Software:

All versions of the above listed software is certified by CNC Engineering as compliant under Windows 95, 98 and NT4.0+. 

Versions 7.0 and greater are certified by CNC Engineering as compliant under DOS 6.2+. 

Versions 2.12 and greater are certified by CNC Engineering as compliant under Windows 95, 98 and NT4.0+. 

Non-compliant Software:

ACTION: Upgrade to Easytalk version 7.0+

ACTION: Upgrade to version 7.0+

ACTION: Upgrade to Focal*Point

ACTION: Upgrade to Focal*Point

ACTION: No upgrade available, set computer's clock to year prior to 2000.

ACTION: Upgrade to Easytalk version 7.0+

ACTION: Upgrade to Easytalk version 7.0+

 

Ascendant Technologies

All of their current software is designed to perform date calculations using a four-digit year value, and is "Year 2000 Compliant" when running on a "Year 2000 Compliant" computer platform. 

Action required for all software packages: 

ACTION: No upgrade available, set computer's clock to year prior to 2000.  There are other potential problems, contact us at at for details.

No version of Remex MIU/CMC firmware is certified as "Year 2000 Compliant" 

Advanced Digitek Research (ADR)